IHM-35-KHA
IHSH-62-BLK
IH-888S-21
When the N1 opportunity presents itself, you gotta take it!!
IHM-35-KHA
IHSH-62-BLK
IH-888S-21
When the N1 opportunity presents itself, you gotta take it!!
IHSH-293-OD
IHSH-13-BLU
IH-888S-21
IHSH-293-OD
IHSW-10-OLV
IH-888S-21
Muffler
Decka gloves
IH-2526J
IHSH-292
IHSH-315-KHA
IH-634S-SBG
Time for a curry.
IHSH-293-OD
IHSH-62-BLK
Ready to take on the day…
IHSH-370-BLU
IH-9526V
IH-634s
IHSI-10 (still getting used to this)
IHSH-292
IHSH-62-BLK
IH-634S-SBG
IH-2526J
IHSH-07-IND
IH-634S-SBG
Filson cap
Lecturing at uni today. Full IH uniform.
IH-526PJ
IHSH-62-IND
IH-634S-SBG
Iron Ranger
@Mizmazzle do you do this for all your jeans mate (including 21oz)? Assume you are referring to a ‘pre-soak’ approach across the board regardless?
What started as a ‘cost saving measure’ meal has turned into a regular Saturday night fave!
Always good when things work out on multiple levels! Easy meal too!
IH-2526J
IHSH-33-IND
IH-888S-21
RW877
@Giles said in IH-634-XHS - 25oz Selvedge Denim Straight Cut Jeans - Indigo:
Recommended as per the guidelines, but mot mandatory. Gets rid of the starch, any shrinkage and beds down the constructional stitching. Will make them last longer.
https://www.ironheart.co.uk/forum/topic/6484/iron-heart-product-care-guidelines
@Giles Just been mulling over this more… would this soaking recommendation influence the dimensions you would seek out for a new pair of 25oz 634, in comparison to 21oz? For example, if you have a great fitting pair of 21oz 634s, and want to achieve a similar fit with 25oz, can you simply go for the same measurements in the 25oz, or do you need to make any adjustments (eg a few extra cm on critical dims) to account for the nature of the fabric/soak/etc?
@goosehd thanks mate, much appreciated. Yes now you mention it there is some excess material at the back - what's going on there?!
Good shout with the work shirt version, I will have a look at the dimensions of it, and maybe reach out to the IH guys too
The short sleeve story continues...
@Brandrea thank you for your sage advice !
@Brandrea thanks for your input mate, and sounds like you have been through a similar issue.
I can’t remember the last time I didn’t wear a white tee under a shirt - the very thought scares the shit out of me
Hey folks, looking for some support here with a fit check, on my ongoing quest to try and secure some short sleeve IH shirts.
After being in between sizes in the 359 (XL too small, XXL too big) I switched over to these 386s, as could see their XL dims were larger than the 359.
Here are pics of me wearing the 386 in this colour - what do you think? My main concern is the chest area and how you can see the shirt under slight tension when buttoned up. This was the largest chest dimension that was in stock in the XL at the time of purchase.
My regular shirt/UHF size is XXL, with some rare exceptions of XXXL. If I went up to XXL in this then I think that would resolve the chest issue, however, overall will very likely be too big.
Also thinking about the future and an inevitable wash which may mean some additional albeit very minimal shrinkage?
I am also totally open to that fact that I may be totally seeing this the wrong!
Thoughts from the community most welcome. Also posted fit pics of the other colour of this 386 in the appropriate thread. @goosehd open invitation to continue on this short-sleeved journey with me I think this fits better than the 359 XXL?
Hey folks, looking for some support here with a fit check, on my ongoing quest to try and secure some short sleeve IH shirts.
After being in between sizes in the 359 (XL too small, XXL too big) I switched over to these 386s, as could see their XL dims were larger than the 359.
Here are pics of me wearing the 386 in this colour - what do you think? My main concern is the chest area and how you can see the shirt under slight tension when buttoned up. This was the largest chest dimension that was in stock in the XL at the time of purchase.
My regular shirt/UHF size is XXL, with some rare exceptions of XXXL. If I went up to XXL in this then I think that would resolve the chest issue, however, overall will very likely be too big.
Also thinking about the future and an inevitable wash which may mean some additional albeit very minimal shrinkage?
I am also totally open to that fact that I may be totally seeing this the wrong!
Thoughts from the community most welcome. Also posted fit pics of the other colour of this 386 in the appropriate thread. @goosehd open invitation to continue on this short-sleeved journey with me I think this fits better than the 359 XXL?
@Twistlock Awesome! 🤩 What is the strategy behind the first soak?